2019 Albany Asphalt Paving Cost Guide

Albany asphalt paving cost

Most of the time, you drive your car over your driveway without a second thought. It’s just there, like the ground beneath your feet. 

But when it’s time to pave (or repave) your driveway, you don’t want any vagaries. You want to know exactly what the project is going to cost and how long it’s going to take. 

That’s why we compiled this complete guide to the cost of asphalt paving in Albany. Here, you’ll find everything you need to know about the factors that influence your project and how to calculate your price.

Factors That Affect the Cost

To figure out the cost of residential asphalt paving in Albany, you need to identify some specifics.

Here are a few factors that will affect the cost of your new driveway. 

Driveway Size and Shape

Like most driveway materials, asphalt is priced per square foot. So, logically, a bigger driveway is going to cost more than a smaller one. 

An asphalt driveway costs an average of $3 to $5 per square foot.

Keep in mind, though, that the size of your driveway isn’t all that matters. The shape makes a difference too. 

Think of it this way. If you have a driveway that runs in a straight line from your house to the street, with just enough space for two cars side by side or back-to-back, you’re basically paving a rectangle. It’s short, sweet, and to the point. 

If your driveway has curves, rounded edges, or anything that makes the shape more complicated, it’s going to require more work to pave the whole driveway evenly, which means it’s going to cost more. 

Initial Installation

Initial installation won’t be an issue for all homeowners, particularly if you’re not original owners of your house (i.e. you built the house yourself). 

If you’re building a new house and need to pave a driveway, though, you’re going to face higher installation costs than someone who’s simply repaving an existing driveway. 

The reason is simple. If there’s never been a driveway at your desired location, then the ground must be prepared. That takes more time and labor than a repaving job, which in turn boosts the sticker price of the project. 

Permits

Regardless of whether this is an initial installation or repaving, you’re going to need the proper permits in order to work on your driveway. 

In Albany, the fee for a permit is $50, with an additional fee for the opening at $3 per square foot. You also need to have the proper insurance coverage for the project. 

You and your contractor should both make sure you have the right permit on hand to avoid fines. Take a look at the permit application and instructions form provided by the city of Albany. 

Drainage and Excavation

In a new driveway installation, you’ll have to deal with many factors that other homeowners have already addressed, such as clearing trees and leveling the land. 

In Albany, the average cost for land excavation and grading is $2,539. Most contractors charge between $40 to $150 an hour for these services, but residential projects typically receive contract bids. 

Whether your driveway is brand new or not, you must make sure you have the proper drainage set up. This will protect the integrity of the driveway to minimize cracking as it ages.

If drainage hasn’t been set up yet, it could cost anywhere from $100 to $1,000, depending on the amount of work needed to install (or repair) your drainage. 

Labor

The cost of labor is a significant factor in the budget of the overall project. The higher the square footage, the more work the contractors must do. Basically, the more complicated your driveway is, the higher your labor costs will be.  

Tonnage

In the same way that square footage influences the cost of the project, the tonnage (how much asphalt you need to complete the project) will influence the overall price. 

You can figure out how much asphalt you need by calculating the length, width, and depth of your chosen project site.

This will give you the surface area you have to cover, which you can then use to calculate the materials needed in tons, based on a standard mix density of 148 pounds per cubic foot. 

The exact mix density will depend on the specific type of asphalt and the contractor you use, but this will give you a good estimate to start with. 

Transportation

You’ll also need to consider the cost of transportation. 

When you order asphalt for a project, it has to be transported from the production facility to the project site. The type of asphalt you use can have an impact on this cost, as a hot mix versus a warm mix will affect how the asphalt can be transported. 

Some contractors mix their own asphalt, while others combine different types of asphalt from other sources. A contractor who buys from a third-party supplier will likely charge a bit more for the asphalt since they have to pay to move it to the work site. 

If you can, it’s a good idea to shop around for a supplier with their own asphalt plant, since you’ll know exactly what quality of asphalt they can provide. 

Types of Paving Material

There are a few types of asphalt pavement to choose from, including: 

  • Porous
  • Perpetual pavement
  • Quiet pavement
  • Warm-mix asphalt
  • Hot-mix asphalt
  • Recycled

Porous asphalt, for example, is a commonly used asphalt in parking lots, as it allows water to drain through the pavement. Perpetual pavement is a combination of asphalt and a multi-layering paving technique that helps the pavement last longer. 

One of the big differences between types of asphalt is hot mix versus warm mix. The change in mixing temperature is about 50 to 100 degrees Fahrenheit, a temperature drop which makes the pavement more eco-friendly. 

Maintenance and Repairs

Finally, when considering the cost of your asphalt driveway, you should look at more than just the short-term project costs. You should look at the entire lifespan of your driveway. 

The best way to think about it is to compare asphalt to the other most common driveway material, concrete. 

Asphalt costs less per square foot of driveway than concrete ($3 to $5 versus $3 to $10, respectively). That said, asphalt does require more frequent maintenance than concrete, which leads many people to think concrete is the more cost-effective option.

Keep in mind, though, that while asphalt needs repairs more often, it’s much easier to repair than concrete. When concrete cracks, the patching is more obvious, which means your repair work will be more extensive (and expensive) than asphalt. 

Cost of Residential Asphalt Paving

So, all told, what does it cost to pave a driveway? 

Ultimately, that depends on you. 

In 2018, the average driveway cost was $3,921 for residential asphalt paving in Albany, New York. However, the price is heavily influenced by its size, complexity, and other factors mentioned above.

Need Asphalt Paving in Albany?

If you need asphalt paving in Albany, you’ve come to the right place. 

We’re your one-stop-shop for all things paving and sealcoating. But more than that, we’re professionals. We know that you have a busy life, and you can’t afford to wait around while your driveway gets fixed. 

That’s why we do it right the first time and offer you warranty options to make sure that you get the quality work you expect.

Ready to talk about your project? Investigating your options? Give us a call today and see how we can help.